XCP on CAN Tool
NETIMPRESS air
Small-Sized and Lightweight CAN Tool
NETIMPRESS air
NETIMPRESS air Common Specifications and Appearance
- Data storage: SD card (sold separately)
- PC interface: USB2.0 / Wireless LAN (801.11b/g/n 2.4GHz) */W model
- Equipment linkage interface: external trigger IN/OUT connector
- Electrical power system: VBAT DC8-20V / USB DC5V±5%
Model | AF930 | AF930/W | AF940 | AF940/W |
---|---|---|---|---|
Specification | CAN:2ch USB |
CAN:2ch USB/WLAN |
Serial:1ch(UART) USB |
Serial:1ch(UART) USB/WLAN |
Cases of Introduction
CAN Programmer and Logger
NETIMPRESS air can perform CAN reprogram.
DTS INSIGHT can either provide our original high-speed protocol called UCOP, or design and develop NETIMPRESS air that matches your protocol.
NETIMPRESS air implements CAN logger function, therefore you can use it as a CAN data logger after updating flash.
XCP on CAN Logger Function
You can use NETIMPRESS air as a XCP on CAN logger.
All you need to do for measuring are register a variable of the measurement target from A2L file and set measurement logging start/end conditions.
NETIMPRESS air supports stand-alone and real-time monitor mode, and the data obtained via stand-alone can be analyzed with RAMScopeVP.
The data can be saved in MDF format.
XCP on CAN
You can measure RAM by XCP on CAN with NETIMPRESS air.
It is easy to operate. Just select a symbol to be monitored from A2L file and set data logging start/end conditions.
Both stand-alone and PC can perform data logging.
Measurement mode supports both DAQ and polling.
Measurement data can be saved as a MDF file, therefore it can be analyzed by other tools.