adviceLUNA / TRQer Support

[Scope of application]
ARM

[Error message]
Time-out error waiting for break.

[Workaround]
• Check if an MPU-specific file (xxx.mpv) is matching with the MPU of a user system.
• Check nSRST pin and nTRST pin of JTAG are connected in accordance with the description of "Notes and points for connecting with a user system" in the adviceLUNAII User’s Manual.
• When using an MPU of software macro core, choose MPU → MPU-Specific Settings from the menu bar of the microVIEW-PLUS. And, check on Adaptive Clock on the User System tab of the MPU-Specific Settings dialog box.
• MPU may be runaway.
→Check the program executed from reset vector is correct.
→In the case there is no program, turn the user system power on or press the user system reset button.
• MPU may sleep.
MPU does not wake up even there is a request to wake up by ICE.
→Check that there is no forced off of MPU power or forced stop of MPU clock by user system.
In the case this error occurred, re-initialization of ICE and user system may require.
For recovery steps, see Chapter 25.1 "Re-initialization of User System" (adviceLUNA).

For recovery steps, see Chapter 26.1 "Re-initialization of User System" (adviceLUNA II). [Cause]
This error is output when there is no response for a certain time when a break is invoked to a user system by the ICE.