adviceLUNA / TRQer Support
[Error]Usable DP is not found.
[Scope of application]
ARM Cortex
[Error message]
Usable DP is not found.
[Workaround]
• nSRST signal may be unstable.
→ Check nSRST signal.
• Implement (IDCODE of DP) of chip maker may not correct.
→ Contact the chip maker.
• ICE-I/F signal may not connect correctly.
→ Check the signal connection.
→ For Cortex-M0/M1M3/M4/Kinetis K Series/TMS320DM814x CM3, to prevent this error, clear the Detect the JP Connection on the Others dialog box of the MPU-specific settings.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when the communication with DP does not execute correctly. This error occurs only for Cortex core.
ICE Error No.f45
ARM Cortex
[Error message]
Usable DP is not found.
[Workaround]
• nSRST signal may be unstable.
→ Check nSRST signal.
• Implement (IDCODE of DP) of chip maker may not correct.
→ Contact the chip maker.
• ICE-I/F signal may not connect correctly.
→ Check the signal connection.
→ For Cortex-M0/M1M3/M4/Kinetis K Series/TMS320DM814x CM3, to prevent this error, clear the Detect the JP Connection on the Others dialog box of the MPU-specific settings.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when the communication with DP does not execute correctly. This error occurs only for Cortex core.
Please cooperate with the questionnaire
Was this answer stood to the visitor's role?