adviceLUNA / TRQer Support
[Error]JTAG-AP port cannot be connected.
[Scope]
ARM JTAG-AP
[Error message]
ICE Error No.f6b: JTAG-AP port cannot be connected.
[Cause]
This error is output when the core is not connected to the port specified in "JTAG-AP Port" in the [MPU-specific Settings].
It occurs when ARM legacy cores such as ARM7/9/11 are attached via CoreSight DAP.
[Workaround]
- Besides set auto for "APSel (0-255)" of MPU-specific settings, the setting may be incorrect.
Set the correct setting by reading to manual Section 21.3.6 [CoreSight1] (adviceLUNA).
Set the correct setting by reading to manual Section 22.3.6 [CoreSight1] (adviceLUNA II).
ARM JTAG-AP
[Error message]
ICE Error No.f6b: JTAG-AP port cannot be connected.
[Cause]
This error is output when the core is not connected to the port specified in "JTAG-AP Port" in the [MPU-specific Settings].
It occurs when ARM legacy cores such as ARM7/9/11 are attached via CoreSight DAP.
[Workaround]
- Besides set auto for "APSel (0-255)" of MPU-specific settings, the setting may be incorrect.
Set the correct setting by reading to manual Section 21.3.6 [CoreSight1] (adviceLUNA).
Set the correct setting by reading to manual Section 22.3.6 [CoreSight1] (adviceLUNA II).
Please cooperate with the questionnaire
Was this answer stood to the visitor's role?