adviceLUNA / TRQer Support
[Error]JTAG communication time-out occurred.
[Scope of application]
ARM
[Error message]
JTAG communication time-out occurred.
[Workaround]
• Check if a signal that interrupts MPU operation is input to the MPU on the user system.
• Check nSRST pin and nTRST pin of JTAG are connected in accordance with the description of Section 3.2.5 “Notes and points for connecting a user system" in the adviceLUNA II User’s Manual(MPU-Specific Edition H2X600(or H2X603)).
• When using the soft macro core MPU, choose MPU → MPU-Specific Settings from the menu bar of the microVIEW-PLUS. Check on Adaptive Clock on the User System tab of the MPU-Specific Settings dialog box.
• Check if JTAG Chain is set up correctly.
[Cause]
This error message appears when register access of L2Cache has a problem.
Set the correct L2C type and L2C base address by selecting MPU - MPU-Specific settings - Others from the menu bar of microVIEW-PLUS.
ICE Error No.1E02
ARM
[Error message]
JTAG communication time-out occurred.
[Workaround]
• Check if a signal that interrupts MPU operation is input to the MPU on the user system.
• Check nSRST pin and nTRST pin of JTAG are connected in accordance with the description of Section 3.2.5 “Notes and points for connecting a user system" in the adviceLUNA II User’s Manual(MPU-Specific Edition H2X600(or H2X603)).
• When using the soft macro core MPU, choose MPU → MPU-Specific Settings from the menu bar of the microVIEW-PLUS. Check on Adaptive Clock on the User System tab of the MPU-Specific Settings dialog box.
• Check if JTAG Chain is set up correctly.
[Cause]
This error message appears when register access of L2Cache has a problem.
Set the correct L2C type and L2C base address by selecting MPU - MPU-Specific settings - Others from the menu bar of microVIEW-PLUS.
Please cooperate with the questionnaire
Was this answer stood to the visitor's role?