adviceLUNA II Support
[Error]Usable AP is not found.
[Scope of application]
ARM Cortex
[Error message]
Usable AP is not found.
[Workaround]
• Besides set auto for “AP to use" or “APSel (0-255)" of MPU-specific settings, the setting may be incorrect.
→ Set the correct setting by reading to Section 25.2 “CoreSight Setting Guide".
• Implement (IDR of AP) of chip maker may not correct.
→ Contact the chip maker.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when AP, specified in “AP to use" or “APSel (0-255)" of MPU-specific settings is not found. This error occurs only for Cortex core.
ARM Cortex
[Error message]
Usable AP is not found.
[Workaround]
• Besides set auto for “AP to use" or “APSel (0-255)" of MPU-specific settings, the setting may be incorrect.
→ Set the correct setting by reading to Section 25.2 “CoreSight Setting Guide".
• Implement (IDR of AP) of chip maker may not correct.
→ Contact the chip maker.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when AP, specified in “AP to use" or “APSel (0-255)" of MPU-specific settings is not found. This error occurs only for Cortex core.
| Note | ICE Error No.F46 |
Please cooperate questionaire cooperation
Was this answer stood to the visitor's role?