adviceLUNA II Support
[Error]Usable DP is not found.
[Scope of application]
ARM Cortex
[Error message]
Usable DP is not found.
[Workaround]
• nSRST signal may be unstable.
→ Check nSRST signal.
• Implement (IDCODE of DP) of chip maker may not correct.
→ Contact the chip maker.
• ICE-I/F signal may not connect correctly.
→ Check the signal connection.
→ For Cortex-M0/M1M3/M4/Kinetis K Series/TMS320DM814x CM3, to prevent this error, clear the Detect the JP Connection on the Others dialog box of the MPU-specific settings.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when the communication with DP does not execute correctly. This error occurs only for Cortex core.
ARM Cortex
[Error message]
Usable DP is not found.
[Workaround]
• nSRST signal may be unstable.
→ Check nSRST signal.
• Implement (IDCODE of DP) of chip maker may not correct.
→ Contact the chip maker.
• ICE-I/F signal may not connect correctly.
→ Check the signal connection.
→ For Cortex-M0/M1M3/M4/Kinetis K Series/TMS320DM814x CM3, to prevent this error, clear the Detect the JP Connection on the Others dialog box of the MPU-specific settings.
• JTAG/SWD clock frequency may too high.
→ Low down “JTAG/SWD clock of MPU-specific setting.
[Cause]
This error is output when the communication with DP does not execute correctly. This error occurs only for Cortex core.
| Note | ICE Error No.f45 |
Please cooperate questionaire cooperation
Was this answer stood to the visitor's role?