NETIMPRESS SupportLogin
FAQ
Question：How to change IP address of G-NETIMPRESS without IP Editor 2(AZ780)
1.Create a YCM file on the root of the CF card. (File name is arbitrary, extension is fixed to .YCM)
* YCM file can be created with the F/DF sheet generator(AZ482).
* When creating with a text editor, copy and paste the contents of the following creation example, and correct the address part to the value you want to set.
＜YCM file example＞
// *******************************************************************
// ETHER_SET_01.YCM
// 2014-04-01
//
// *******************************************************************
[ETHER NET]
ADDRESS=192.168.0.1
PORT=1000
SUBNET MASK=255.255.255.0
GATEWAY=0.0.0.0
2.Turn on the power of G-NETIMPRESS with the CF card containing the YCM file inserted.
3.If the IP address already set in the programmer and the IP address described in the YCM file do not match,RDY and RUN LED flash at the same time for about 10 seconds.
4.If you press EXE button on the front of the programmer unit during the above blinking period, the settings described in the YCM file will be reflected in the programmer.
* YCM file can be created with the F/DF sheet generator(AZ482).
* When creating with a text editor, copy and paste the contents of the following creation example, and correct the address part to the value you want to set.
＜YCM file example＞
// *******************************************************************
// ETHER_SET_01.YCM
// 2014-04-01
//
// *******************************************************************
[ETHER NET]
ADDRESS=192.168.0.1
PORT=1000
SUBNET MASK=255.255.255.0
GATEWAY=0.0.0.0
2.Turn on the power of G-NETIMPRESS with the CF card containing the YCM file inserted.
3.If the IP address already set in the programmer and the IP address described in the YCM file do not match,RDY and RUN LED flash at the same time for about 10 seconds.
4.If you press EXE button on the front of the programmer unit during the above blinking period, the settings described in the YCM file will be reflected in the programmer.
Please cooperate with questionnaire cooperation
Was this answer stood to the visitor's role?